Cinematography Explained: Lighting Part 2
By Maya Wilkinson and Jody-Ann White
All video uses some sort of lighting, whether it be natural light (from the sun) or artificial lights. The goal of video lighting is to choose the best source(s) to achieve your goals.
First and foremost you need enough light. You must ensure that your camera is able to record an acceptable picture in the conditions. With modern cameras this is seldom a problem except in very low light or strong contrast.
Assuming you have enough light, you must then consider the quality of the light and how the various light sources combine to produce the image.
If you have clashing light sources (e.g. artificial interior lights with sunlight coming through the windows), you may find the colours in your image appear unnatural. It's best to control the light sources yourself if possible (e.g. turn off the lights or close the curtains).
When moving between locations, think about what light source you are using. If you move from an outside setting to an inside one with artificial lights, the amount of light may seem the same but the colour temperature will change according to the type of lights. In this case you need to white balance your camera for the new light source.
Contrast Ratio
Contrast ratio is the difference in brightness between the brightest and darkest parts of the picture. Video does not cope with extreme contrast as well as film, and nowhere near as well as the human eye. The result of over-contrast is that some parts of the picture will be too bright or too dark to see any detail. For this reason you need to ensure that there is not too much contrast in your shot. See Camera Contrast Ratio for more details.
The Standard 3-Point Lighting Technique
The Three Point Lighting Technique is a standard method used in visual media such as video, film, still photography and computer-generated imagery. It is a simple but versatile system which forms the basis of most lighting. Once you understand three point lighting you are well on the way to understanding all lighting.
The technique uses three lights called the key light, fill light and back light. Naturally you will need three lights to utilise the technique fully, but the principles are still important even if you only use one or two lights. As a rule:- If you only have one light, it becomes the key.
- If you have 2 lights, one is the key and the other is either the fill or the backlight.
Key Light
This is the main light. It is usually the strongest and has the most influence on the look of the scene. It is placed to one side of the camera/subject so that this side is well lit and the other side has some shadow.
Fill Light
This is the secondary light and is placed on the opposite side of the key light. It is used to fill the shadows created by the key. The fill will usually be softer and less bright than the key. To acheive this, you could move the light further away or use some spun. You might also want to set the fill light to more of a flood than the key.
Back Light
The back light is placed behind the subject and lights it from the rear. Rather than providing direct lighting (like the key and fill), its purpose is to provide definition and subtle highlights around the subject's outlines. This helps separate the subject from the background and provide a three-dimensional look.If you have a fourth light, you could use it to light the background of the entire scene.
Key Light
Fill Light
0 Response to "Cinematography Explained: Lighting Part 2"
Post a Comment